Fan-assisted trench heating with EC technology.
AREAS OF APPLICATION / INSTALLATION
- Clear view and feel good temperature in front of full-length glass façades
- For complete room heating, a supplementary heat supply and/or cold air screening
- High-performance at low temperature ranges, perfect in combination with trend-setting heating systems
- 120 different versions are available
... also good to know
- The Katherm QK benefits from the expertise of our in-house Research and Development Center, tailored to customer requirements from the marketplace.
- The heat outputs were measured and determined in accordance with E DIN EN 16430 "Fan-assisted radiators, convectors and trench convectors" Part 1: "Technical specifications and requirements" and Part 2: "Test method and rating of the heat output."
- The QK standard lengths can be extended in 200 mm increments from 1000 mm to 3200 mm. Lengths that are not available can be created with individual tailor-made units.
The combination of EC technology and KaControl stands for maximum energy efficiency, as the advantages of the EC fan can be ideally used in operation thanks to the continuous fan control by the KaControl technology.
At the same time, the air conditioning system that is operated at low fan speed to meet demand is advantageous especially in residential properties, offices and hotels. The ability to reduce the fan speed and thus also the air volume of the fans is of huge significance in terms of noise levels.
Kampmann Katherm QK with KaControl control are fully wired and delivered ex-works complete with all of their electrical components fitted. An effective parameterisable microprocessor provides all of the requisite functions, thus every Katherm QK has its own "intelligence" and can be operated in groups via Kampmann-t-Lan or CANbus networks.
KaControl Katherm QK can be fitted with plug-in communications interfaces for single room control or for connection to higher-order management systems. Every basic unit therefore has the potential to be integrated into a technical building automation network.
Control zones with up to 6 Katherm QK can be connected to a KaController via simple 2-wire bus connection.
Control zones with up to 30 Katherm QK can be connected to a KaController via a CANbus connection.
|Price List 2019||download as||.pdf, 15,42 MB|
|Katherm QK trench heating, (until 02/2019)||download as||.pdf, 3,47 MB|
|Katherm QK // QK nano trench heating, (from 03/2019)||download as||.pdf, 11,23 MB|
|Spezial Katherm Modular System, screen-optimized||download as||.pdf, 1,05 MB|
|Spezial Katherm QK trench heating , screen-optimized||download as||.pdf, 4,01 MB|
|Product overview, products international||download as||.pdf, 5,87 MB|
|Overview product innovations 2017, products international||download as||.pdf, 2,41 MB|
|Overview Katherm Trench Units||download as||.pdf, 3,07 MB|
|Overview Katherm Supply Air Versions||download as||.pdf, 4,03 MB|
|Kampmann Hotel References||download as||.pdf, 2,57 MB|
|Spezial Hotel||download as||.pdf, 2,20 MB|
|Spezial Hotel||download as||.pdf, 2,41 MB|
|Spezial Commercial buildings||download as||.pdf, 2,72 MB|
|Spezial Commercial buildings||download as||.pdf, 2,17 MB|
|Spezial KaControl building automation||download as||.pdf, 794,90 KB|
|Information sheet trench heating - EN 16430, applicable internationally||download as||.pdf, 221,92 KB|
|Katherm QK 190/215 trench heating, (from 03/2019)||download as||.pdf, 5,37 MB|
|Katherm QK trench heating, (until 02/2019)||download as||.pdf, 1,37 MB|
|Katherm QK with KaControl||download as||.pdf, 4,02 MB|
|Katherm QK - Wiring Diagrams, electromechanical control||download as||.pdf, 1,22 MB|
|Katherm QK - Wiring Diagrams, Control KaControl||download as||.pdf, 1,81 MB|
|Katherm QK, US-version||download as||.pdf, 1,21 MB|
|TÜV Certificate ISO 9001:2008||download as||.pdf, 140,21 KB|
|EU Declaration of Conformity Katherm trench heating||download as||.pdf, 840,35 KB|
|Building product declaration Katherm trench heating||download as||.pdf, 333,01 KB|
|Data sheet ErP regulation 2016-2281 Katherm QK||download as||.pdf, 345,38 KB|
|BIM data (Building Information Modeling)|
|BIM data||download as||Download|
174,00 € plus VAT
Room temperature sensor
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
46,00 € plus VAT
46,00 € plus VAT
Clip-on pipe sensor
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
44,00 € plus VAT
Serial CANbus card
For increasing the cable length from the first to the last unit from 30 to 500 m
95,00 € plus VAT
Serial Modbus card
91,00 € plus VAT
Katherm NK 182 (trench heights 150 mm and 200 mm)
Katherm NK 232/300/380 (all trench heights)
Katherm HK 340
28,00 € plus VAT
4,20 € plus VAT
Return shut-off valve
Katherm HK 320, Katherm HK 340, Katherm HK 290
15,00 € plus VAT
Room thermostat for infinitely adjustable parallel control of:
- max. 10 Katherm QK
- max. 10 Katherm QK nano
85,00 € plus VAT
90° roll-up grilleDownload specifications (.rtf)
456,00 € plus VAT
Roll-up grille, other anglesDownload specifications (.rtf)
526,00 € plus VAT
90° linear grilleDownload specifications (.rtf)
314,00 € plus VAT
Linear grille, other anglesDownload specifications (.rtf)
360,00 € plus VAT
Wooden installation cover
A higher degree of motor efficiency is possible with the new highly efficient EC fans that are capable of achieving energy-savings of up to 60% compared with conventional split-pole motors.
Up to 6 Katherm QK can be controlled via the KaControl T-LAN interface, depending on the control and regulation concept. This can be extended up to 30 Katherm QK via a CANbus interface (CANbus card needed).
The following Katherm QK are available: