Recirculating air fan coils: heating, cooling and filtering for maximum comfort.
AREAS OF APPLICATION / INSTALLATION
- Hotels, offices and commercial buildings, showrooms and sales floors etc.
- For new buildings and refurbishment projects
- Buildings with an exacting requirement in terms of energy efficiency and noise levels
- Seven sizes for all common building grid sizes
- With ceiling casings, in suspended ceilings, along sill-lines or free-standing
... also good to know
- Available in all common RAL colours
- Casing in a slim design thanks to recessed side components
- Hotel ceiling encased model: position the air intake as required with air inlet grilles and Iden shadow gaps
Venkon Fan coil EC 3D
Kampmann Venkon with KaControl regulation are delivered ex-works fully wired and with all of their electrical components fitted. A high-performance microprocessor provides all of the requisite functions, thus every Venkon has its own "intelligence" and can be operated in groups by means of Kampmann-t-Lan or CANbus networks.
KaControl Venkon can be fitted with plug-in communications interfaces for single room control or for connection to higher-order management systems. Every basic unit therefore has the potential to be integrated into a technical building automation network.
- Valve actuation for 2- and 4-pipe systems
- 3-stage valve control with automatic function according to room temperature
- Temperature recording via KaController or clip-on temperature sensor
- 230 V OPEN/CLOSE valve actuation or 24VAC 0-10 V
- Motor fault evaluation, condensation alarm
- Changeover function in 2-pipe system (heating/cooling) via an external potential-free contact or a clip-on temperature sensor
- Connection to open BMS systems by optional interface cards (BACnet, Modbus)
Control zones with up to 6 Venkon can be connected via a simple 2-wire bus connection to a KaController.
Control zones with up to 30 Venkon can be connected via a CANbus connection to a KaController.
|Price List 2018||download as||.pdf, 10,85 MB|
|Venkon Fan Coils||download as||.pdf, 4,32 MB|
|Spezial Venkon fan coils||download as||.pdf, 1,68 MB|
|Induction units vs. Fan Coil units, Economical and technical comparison for cooling in hotel bedrooms||download as||.pdf, 145,94 KB|
|Product overview, products international||download as||.pdf, 5,87 MB|
|Overview product innovations 2017, products international||download as||.pdf, 2,41 MB|
|Kampmann Hotel References||download as||.pdf, 2,57 MB|
|Spezial Hotel||download as||.pdf, 2,20 MB|
|Spezial Hotel||download as||.pdf, 2,41 MB|
|Spezial retail chains||download as||.pdf, 3,43 MB|
|Spezial retail chains||download as||.pdf, 3,45 MB|
|Spezial Commercial buildings||download as||.pdf, 2,72 MB|
|Spezial Commercial buildings||download as||.pdf, 2,17 MB|
|Spezial KaControl building automation||download as||.pdf, 794,90 KB|
|Spezial Logistics buildings||download as||.pdf, 830,76 KB|
|Spezial sports hall||download as||.pdf, 2,25 MB|
|Overview Heating and Cooling with Refrigerants||download as||.pdf, 4,39 MB|
|KaControl for Venkon AC / Venkon EC||download as||.pdf, 3,81 MB|
|Venkon AC Fan Coils||download as||.pdf, 8,67 MB|
|Interseroh Recycling Certificate||download as||.pdf, 85,22 KB|
|TÜV Certificate ISO 9001:2008||download as||.pdf, 140,21 KB|
|EU Declaration of Conformity Venkon fan coils||download as||.pdf, 1,06 MB|
|Venkon test certificate VDI 6022||download as||.pdf, 434,71 KB|
|Data sheet ErP regulation 2016-2281 Venkon||download as||.pdf, 435,91 KB|
|BIM data (Building Information Modeling)|
|BIM data||download as||Download|
|Venkon - Flexible pipe connection unit, model size 1||download as||.dwg, 171,06 KB||.dxf, 551,05 KB||.pdf, 36,13 KB|
|Venkon - Flexible pipe connection unit, model size 2||download as||.dwg, 173,32 KB||.dxf, 556,97 KB||.pdf, 36,74 KB|
|Venkon - Flexible pipe connection unit, model size 3||download as||.dwg, 173,36 KB||.dxf, 557,19 KB||.pdf, 36,88 KB|
|Venkon - Flexible pipe connection unit, model size 4||download as||.dwg, 175,63 KB||.dxf, 563,11 KB||.pdf, 36,24 KB|
|Venkon - Flexible pipe connection unit, model size 5||download as||.dwg, 175,83 KB||.dxf, 557,14 KB||.pdf, 36,25 KB|
|Venkon - Flexible pipe connection unit, model size 6||download as||.dwg, 175,64 KB||.dxf, 563,38 KB||.pdf, 35,87 KB|
|Venkon - Flexible pipe connection unit, model size 7||download as||.dwg, 177,84 KB||.dxf, 568,92 KB||.pdf, 36,00 KB|
|Venkon - Recirculating air, free-standing, model size 1||download as||.dwg, 682,75 KB||.dxf, 5,22 MB||.pdf, 160,94 KB|
|Venkon - Recirculating air, free-standing, model size 2||download as||.dwg, 680,50 KB||.dxf, 5,22 MB||.pdf, 160,06 KB|
|Venkon - Recirculating air, free-standing, model size 3||download as||.dwg, 683,25 KB||.dxf, 5,22 MB||.pdf, 160,87 KB|
|Venkon - Recirculating air, free-standing, model size 4||download as||.dwg, 678,28 KB||.dxf, 5,22 MB||.pdf, 160,27 KB|
|Venkon - Recirculating air, free-standing, model size 5||download as||.dwg, 682,00 KB||.dxf, 5,22 MB||.pdf, 160,70 KB|
|Venkon - Recirculating air, free-standing, model size 6||download as||.dwg, 680,78 KB||.dxf, 5,23 MB||.pdf, 159,78 KB|
|Venkon - Recirculating air, free-standing, model size 7||download as||.dwg, 687,97 KB||.dxf, 5,25 MB||.pdf, 159,82 KB|
|Venkon - Recirculating air, model size 1||download as||.dwg, 1,17 MB||.dxf, 9,20 MB||.pdf, 254,60 KB|
|Venkon - Recirculating air, model size 2||download as||.dwg, 1,18 MB||.dxf, 9,23 MB||.pdf, 255,47 KB|
|Venkon - Recirculating air, model size 3||download as||.dwg, 1,19 MB||.dxf, 9,48 MB||.pdf, 260,04 KB|
|Venkon - Recirculating air, model size 4||download as||.dwg, 1,19 MB||.dxf, 9,46 MB||.pdf, 260,38 KB|
|Venkon - Recirculating air, model size 5||download as||.dwg, 1,14 MB||.dxf, 9,14 MB||.pdf, 257,30 KB|
|Venkon - Recirculating air, model size 6||download as||.dwg, 1,18 MB||.dxf, 9,44 MB||.pdf, 257,44 KB|
|Venkon - Recirculating air, model size 7||download as||.dwg, 1,24 MB||.dxf, 10,03 MB||.pdf, 258,72 KB|
|Venkon - Sheet steel accessories, model size 1||download as||.dwg, 189,31 KB||.dxf, 1,42 MB||.pdf, 73,02 KB|
|Venkon - Sheet steel accessories, model size 2||download as||.dwg, 196,03 KB||.dxf, 1,49 MB||.pdf, 75,28 KB|
|Venkon - Sheet steel accessories, model size 3||download as||.dwg, 185,06 KB||.dxf, 1,34 MB||.pdf, 74,98 KB|
|Venkon - Sheet steel accessories, model size 4||download as||.dwg, 192,53 KB||.dxf, 1,37 MB||.pdf, 72,89 KB|
|Venkon - Sheet steel accessories, model size 5||download as||.dwg, 186,06 KB||.dxf, 1,37 MB||.pdf, 73,18 KB|
|Venkon - Sheet steel accessories, model size 6||download as||.dwg, 189,03 KB||.dxf, 1,38 MB||.pdf, 74,28 KB|
|Venkon - Sheet steel accessories, model size 7||download as||.dwg, 189,23 KB||.dxf, 1,51 MB||.pdf, 76,26 KB|
This table only gives you a brief overview of the technical data. If you are looking for a more detailed product description and further technical data, please use the technical catalogue. The product configurator and the calculation program will help you to find the right article for your selection.
174,00 € plus VAT
Room temperature sensor
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
46,00 € plus VAT
Air intake sensor
44,00 € plus VAT
Clip-on pipe sensor
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
44,00 € plus VAT
Serial CANbus card
For increasing the cable length from the first to the last unit from 30 to 500 m
95,00 € plus VAT
Serial Modbus card
91,00 € plus VAT
175,00 € plus VAT
282,00 € plus VAT
Valve kit 222
166,00 € plus VAT
Valve kit 242
260,00 € plus VAT
Valve kit 221
180,00 € plus VAT
Valve kit 241
306,00 € plus VAT
Valve kit 422
330,00 € plus VAT
Valve kit 442
548,00 € plus VAT
317,00 € plus VAT
547,00 € plus VAT
511,00 € plus VAT
411,00 € plus VAT
30,00 € plus VAT
292,00 € plus VAT
Air discharge box with primary air spigotDownload specifications (.rtf)
132,00 € plus VAT
Air ductDownload specifications (.rtf)
162,00 € plus VAT
Air duct, 90° angledDownload specifications (.rtf)
122,00 € plus VAT
Air grille for inside use
180,00 € plus VAT
Air intake box with primary air spigotDownload specifications (.rtf)
112,00 € plus VAT
Ceiling air diffuser
262,00 € plus VAT
Circular duct connecting unitDownload specifications (.rtf)
166,00 € plus VAT
Flexible connectionDownload specifications (.rtf)
48,00 € plus VAT
Sound attenuatorDownload specifications (.rtf)
271,00 € plus VAT
Kampmann Venkon heat, cool and filter; mixed air units also provide additional ventilation. With their compact design, they take up a minimal amount of space yet provide excellent energy transport using water and supply energy decentrally into rooms. Venkon can be operated with the latest heat pumps and low temperature condensing boilers. They also provide adequate heating for a room thanks to the high-capacity heating elements. Last but not least, Venkon can also provide cooling because - unlike radiators - they are fitted with a condensation tray. The prerequisite for cooling is a bivalent heat pump.
There are basically two options: Venkon can be very simply be wired electromechanically, although this requires an on-site control system. The units can also be factory-fitted with an intelligent KaControl control unit fitted on the unit, requiring no further assembly or installation on site. The KaControl control app is adapted to the Venkon unit design and functions and also provides additional interfaces via BACnet, LON or Modbus, enabling communication with a BMS system with very little additional work.
Venkon fan convectors can be operated at cold water temperatures below the dew point. They require a powder-coated condensation tray for this, that safely collects the water that is produced and carries is off to the sides. The condensation tray is fitted on both sides with a Ø 15 mm nozzle complete with hose, via which the condensation is naturally carried away. This version requires a gradient of at least 1% in the pipe and discharge via a siphon (cf. DIN EN 12056). Alternatively the units can be fitted with a condensation pump that carries the liquid away into a waste water pipe, a factor that is relevant with ceiling-mounted Venkon with optional casing. The disadvantage of this option are the pump noises in cooling mode.
No, Venkon can be ordered as basic units, with or without casing. The advantage of a factory-fitted casing is its ease of installation, with only the water and electrical connections needing to be done on site and the side mullion panels fitted.
The following factory-fitted casing versions are available:
- Wall-mounted casing: the Venkon is installed on the wall with no contact with the floor; skirting boards, cable ducts etc. can be fitted with ease.
- Wall-standing casing with induction grills: the Venkon stands on the floor and is also fitted to the wall.
- Free-standing casing: the Venkon is installed anywhere in the room, with water/electrical connections coming out of the floor.
- Hotel Venkon casing: the Venkon is installed in the entrance lobby of the hotel bedroom and encased by dry-lined wall sections. With Kampmann Hotel Venkon, the entire ceiling area of the entrance area is fitted with a building-specific casing. Manufactured from sheet metal, it is faster to fit during the second-fit phased, is significantly more durable and maintenance-friendlier than the traditional system.
- Made-to-measure sill-line casing: the Venkon are fitted with project-specific casings (cf. Casings/Project solutions).
- Alternatively: the Venkon basic unit is fitted with a casing provide by the customer, within a suspended ceiling (grid dimensions 625 x 625mm) or encased by dry-lined casing elements. Air induction and discharge is provided through air grilles and ductwork.
No, that is not the case. The sound pressure levels for offices, hotel bedrooms and others are generally given in DIN EN 15251 "Input parameters for room climate for the design and assessment of the energy efficiency of buildings - room air quality, temperature, light and acoustice" in Appendix E "Internal noise criteria for some rooms and buildings". Venkon C units meet these requirements definitively.
Kampmann 2-pipe Venkon are ideal for providing heating and cooling and can be switched over depending on the season. You require only one flow and one return connection. 4-pipe units are ideal if the user would like to switch between heating and cooling at any time and according to his personal needs.